Autobahn88 Auto Performance Product News Blog

• OD : 51mm/2”
• 1.5mm Wall Thickness
• Weight = 2kg
• Size:L38cm x W16cm x H12cm

* All D1 SPEC products comes with Replacement warranties 36 months**

==Product Information== 

* Slim Designed External Voltage Controller + Display

* Increase your ignition original setting 12~14V up to 15.8V; can be manually adjust up to 18V depends on your modifications

* LED Display Volt Meter; Display your current ignition system Voltage setting

* Increase the Horsepower and Torque

* Decrease Carbon Dust Accumulation:
Strengthen the ignition system to burn the gasoline fully, It will not only decrease the carbon dust accumulation because of incomplete burning, but also lengthen the life of engine and exhaust system

* Decrease Fuel Wasting effectively:
Burning efficiency becomes better and better after the ignition performance is promoted, Using every drop of gasoline effectively can decrease fuel wasting up to 20%

* Universal Fits all vehicles (for all turbo and N/A Car )

* 1 x [Japan] D1 SPEC VSD “V” Ignition Booster System (VSD 5)

* Made of Billet Aluminum Case

* Support up to 8 cylinder

* More Spark energy & Power

* Quicker Throttle response

* Improves idle & starting

* Fuel efficiency

* Comes with English Manual

• 100% SUS-304 Stainless Steel and Flanges
• Mandrel bent and fully TIG welded for strength and durability.
• Fully polished and ported for maximum performance.
• Gaskets and bolts included as shown.
• Increases power and torque over the entire RPM range.
• Significantly increases exhaust gasflow and throttle response.

• VW Golf MK4 AWU / AWP / AWD / AWW
• VW Golf MK4 1.8T AVC / APH
• VW Bettle 1.8T AWU / AWP / AWD / AWW
• VW Bettle 1.8T AVC / APH
• Audi TT 180 AWU / AWP / AWD / AWW
• Audi TT 180 AVC / APH
• Seat Leon 1.8T 20V AWU / AWP / AWD / AWW
• Seat Leon 1.8T 20V AVC / APH

• Accept higher pressure than the original.
• The temperature change will not affect the shape and the flow rate.
• Not Easy to break down or harden, more durable than the original/
• Brand New

• 4 ply Polyester
• 5mm Wall Thickness
• Working Temperature:-60 degree to 180 degree
• Hose Burst Pressure Limit Equal to 5 Bar
• Ensure the hose working properly in extreme racing environment.

• Accept higher pressure than the original
• The temperature change will not affect the shape and the flow rate.
• Not Easy to break down or harden, more durable than the original
• 100% Brand New

• 4 ply Polyester
• 5mm Wall Thickness
• Working Temperture:-60 degree to 180 degree
• Hose Burst Pressure Limit Equal to 5 Bar
• Ensure the hose working properly in extreme racing environment.

• 1 x Short Aluminium Pipe Joiner
• 2 x Germany Stainless Steel Clamps

• Adapt on Different Silicone or Plastic Hose
• Provide Leak-Proof Connection

• High  Pressure, High Heat Intake or  Exhaust Pipe Coupling Purpose
• Handing Higher Pressure than German Clamps
• Smooth on Inside and Will Not Bite into Hose
• Easy to Tighten since it is out away from the Clamping Surface
• Clean, Shiny, and Professional Looking